This automated visual Fiber tensile testing program is ideal for operator skill impartial utilization in production and laboratory configurations. Two basic design designs permit the consumer to select between a set up for regular linear Proof testing and with additional mandrels for rotary higher power testing.
The linear edition is designed for creation Proof screening with forces approximately 22 N. Motor-driven clamps with very carefully designed rubber inserts ensure that the Optical Fiber Proof-Testing Machine is not damaged in the testing procedure while simultaneously eliminating the necessity for an external air supply. Degrees of tugging force, tugging speed and hold time are programmable and conveniently accessible to the operator from the built in LCD touch screen control. Information from tests can be stored and accessed via the USB dock or Ethernet interface.
Mandrels of the same style as with NYFORS’ visual Fiber recoaters can be easily installed on the Proof tester in the rotary higher strength settings. The Fiber is wrapped across the two mandrels which support it with a special clamping system. This way much higher loads can be employed onto the Fiber, allowing breaking power assessments under controlled conditions.
Adjustable clamp placement facilitates testing using the greatest force amounts as well as testing of short Fiber measures. The lightweight and light weight style helps make the instrument simple to maneuver in a lab environment and also to incorporate in a production work bench in which space reaches reduced. The equipment is really a lightweight and lightweight tool perfect for testing the potency of visual materials as much as 30 N. The equipment is developed to fulfill all sorts of programs when a power test has to be carried out.
The machine is made with all the consumer in mind. The Optical Fiber Ribbon Machine is definitely placed in the carefully guided linear clamps, and the screening begins automatically having a “One Touch” go button. The built-in microprocessor controls each of the essential guidelines like pulling force, pulling velocity and hold time. This enables for any completely controlled test every time.
The device can be attached to an outside Computer, which enables use of all programmable guidelines and configurations. The machine is adapted to face-on your own use or to the incorporation into various subsystems. The device has an extensive capability of signing and saving information like tugging force, tugging velocity and Fiber diameter and other parameters.
Two recoat injector configurations can be purchased. The PTR307 utilizes a computerized pump to inject the recoat materials. The quantity of materials dispensed from the automatic injector is managed by hand using the top-installed “Inject” button or programmed to the device using the tablet control. The PTR307B includes a handbook recoat shot program that will require the user to manually distribute the recoat materials in to the mold cavity; another one injector for the PTR307B recoater can be obtained listed below. Make sure you note the automatic injector is only appropriate for higher-directory recoat material, whilst the handbook injector works with both reduced- and- index recoat material; they are both marketed individually below. Make sure you contact Technology Support for more information.
he handbook injector can be installed to compatible Fiber recoaters using the 4-40 anchoring screws on the recoater real estate (see photo towards the right). Utilize a 3/32″ hex key to secure the injector prior to use. To get in touch the PTRRRM towards the recoater mold, tighten the connector at the conclusion of the eco-friendly plastic tubes, then release by a 1/4 choose enable rotation.
The injector comes with a syndication valve and two-position choice handle for directing the stream of recoat materials. A knurled dispensing attach with an inner plunger works as a syringe for the recoat material. To fill up the syringe, point the lever downward (i.e., toward the recoat container), then spin the knurled dispensing screw counterclockwise till it spins freely to fill the syringe (demonstrated inside the photo for the right). Then, to inject the recoat material into the mold, point the handle horizontally (i.e., dealing with qyjflh knurled screw) and rotate the screw clockwise until close to the finish in the journey range is reached. Avoid bottoming the dispenser since this may harm the interior plunger; also take care when re-interesting the threads to prevent cross threading the dispensing screw. Several fill up/inject actions may be required till air is displaced inside the program. Use lens cells plus an acetone or alcoholic beverages cleansing solution to collect Optical Fiber Proof-Testing Machine material that runs from your mold.